View HPWT-TL00_4157857.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HPWT TH00 HPWT FH00 HPWT TL00 HPWT FL00
SnapLED 70
Technical Data DS09
Using Lumileds' patented solderless clinch technology, SnapLED 70 emitters are attached to a formable metal substrate that offers both styling flexibility and ruggedness unmatched by any other LED assembly. Benefits * Rugged Lighting Products * Electricity Savings * Maintenance Savings * 3-Dimensional Array Design * Environmental Conformance
SnapLED's brilliant luminance, flexibility, and reliability enable distinctive and durable lighting designs for vehicles, signals, and specialty lighting.
Features High Luminance * Low Power Consumption * Low Thermal Resistance * Low Profile * Solderless Mounting Technique * Formable Substrate * Meets SAE/ECE/JIS Automotive Color Requirements * Packaged in tubes for use with automatic insertion equipment
*
Typical Applications * Automotive Lighting - Rear Combination Lamps - Front Turn Signal Lamps - High Mount Stop Lamps - Indirect Lighting * Solid State Lighting and Signaling
Outline Drawings
Notes:
1. Dimensions are in millimeters (inches). 2. Dimensions without tolerances are nominal. 3. Cathode lead is indicated with a "C" and anode lead is indicated with an "A." 4. Special characteristics are designated with a triangle. 5. Clinch joint locations shown in dashed lines on top view of part (11.50 mm spacing).
Selection Guide
Total flux V (lm) @ 70 mA[1] Min. 3.0 1.5 Total Included angle 0.90 V (Degrees) [2] Typ. 120 70 120 70
Notes:
1. V is the total luminous flux output as measured with an integrating sphere after the device has stabilized (Rj-a = 200C/W, TA = 25C). 2. 0.90 V is the included angle at which 90% of the total luminous flux is captured. See Figure 5.
Part Number HPWT-TH00-00000 HPWT-FH00-00000 HPWT-TL00-00000 HPWT-FL00-00000
LED Color TS AlInGaP Red-Orange TS AlInGaP Amber
Absolute Maximum Ratings at TA = 25C
Parameter DC Forward Current [1,2] Power Dissipation Reverse Voltage (IR = 100 A) Operating Temperature Range Storage Temperature Range High Temperature Chamber LED Junction Temperature HPWT-Tx00/Fx00 70 221 10 -40 to +100 -55 to +100 125 (2 hrs.) 125 Units mA mW V C C C C
Notes:
1. Operation at currents below 10 mA is not recommended. 2. Derate linearly as shown in Figure 3.
SnapLED 70 Technical Data
2
Document #: DS09 (08/05)
Optical Characteristics at TA = 25C, IF = 70 mA, RJ-A = 200C/W
Total flux V (lm) [1] Min. 3.0 1.5 Peak wavelength peak (nm) Typ. 630 596 Color, Dominant Wavelength D (nm) [2] Typ. 621 594 Total Included Angle0.90 V (degrees) [3] Typ. 120 70 120 70 Ratio of Luminous Intensity to Total Flux Iv(cd)/v(lm) Typ. 0.6 2.0 0.6 2.0
Notes:
Viewing Angle 2 1/2 (Degrees) Typ. 85 30 85 30 1. v is the total luminous flux output as measured with an integrating sphere after the device has stabilized. 2. The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. 0.90 V is the included angle at which 90% of the total luminous flux is captured. See Figure 5.
Device type
HPWT-TH00 HPWT-FH00 HPWT-TL00 HPWT-FL00
Electrical Characteristics at TA = 25C
Forward Voltage VF (Volts) @ IF = 70 mA Min Typ 2.50 2.60 Max 3.03 3.15 Reverse Breakdown VR (Volts) @ IR = 100 A Min. 10 10 Typ. 20 20
Capacitance
C (pF) VF = 0, F = 1MHz. Typ. 40 40
Device type
Thermal resistance RJ-PIN (C/W) Typ. 80 100
Speed of Response s (ns) [1] Typ. 20 20
HPWT-xH00 2.19 HPWT-xL00 2.19
SnapLED 70 Technical Data
3
Document #: DS09 (08/05)
Figures
Figure 1. Relative Intensity vs. Wavelength.
Figure 2. Forward Current vs. Forward Voltage. Forward Voltage
70
MAXIMUM DC CURRENT (mA)
60 50 Rth(j-a) = 300 C/W 40 30 20 10 0 0 20 40 60 80 100 Rth(j-a) = 400 C/W Rth(j-a) = 500 C/W Rth(j-a) = 600 C/W
AMBIENT TEMPERATURE (C)
Figure 3. HPWT-xx00 Maximum DC Forward Current vs. Ambient Temperature.
Figure 4. HPWT-xx00 Relative Luminous Flux vs. Forward Current.
Figure 5. HPWT-xx00 Percent Total Luminous Flux vs. Total Included Angle.
Figure 6a. HPWT-Tx00 Relative Intensity vs. Off Axis Angle.
Note:
For additional information, please refer to the Lumileds AN 1149 Series.
Figure 6b. HPWT-Fx00 Relative Intensity vs. Off Axis Angle.
SnapLED 70 Technical Data
4
Document #: DS09 (08/05)
Company Information
SnapLEDTM is developed, manufactured and marketed by Lumileds Lighting, LLC. Lumileds is a world class supplier of Light Emitting Diodes (LEDs) producing billions of LEDs annually. Lumileds is a fully integrated supplier, producing core LED material in all three base colors (Red, Green, Blue) and White. Lumileds has R&D development centers in San Jose, California and Best, The Netherlands and production capabilities in San Jose, California and Malaysia.
Lumileds is pioneering high flux LED technology and bridging the gap between solid state LED technology and the lighting world. Lumileds is absolutely dedicated to bringing the best and brightest LED technology to enable new applications and markets in the lighting world.
Lumileds may make process or materials changes affecting the performance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders.
LUMILEDS
www.luxeon.com www.lumileds.com For technical assistance or the location of your nearest Lumileds sales office, call: Worldwide: +1 408-435-6044 US Toll free: 877-298-9455 Europe: +31 499 339 439 Fax: 408-435-6855 Email us at info@lumileds.com
2004 Lumileds Lighting. All rights reserved. Lumileds Lighting is a joint venture between Agilent Technologies and Philips Lighting. Luxeon is registerd a trademark of Lumileds Lighting, Inc. Product specifications are subject to change without notice.
SnapLED 70 Technical Data
5
Document #: DS09 (08/05)
Lumileds Lighting, LLC 370 West Trimble Road San Jose, CA 95131

▲Up To Search▲

Price & Availability of HPWT-TL00

	To Download HPWT-TL00 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .